You can use this product, it's very excellent
CXL 2-1/... Base Station VHF Antenna (and Marine VHF Antenna), 160 MHz VHF Band
Bear in mind that the higher the VHF antenna is mounted the better coverage. Avoid mounting the antenna parallel with and in the neighbourhood of other metal parts, such as mast, supporting wires etc. Free mounting and as high as possible is most preferable, otherwise the SWR and the radiation diagram will be influenced.
The VHF antenna is a 1/2λ design and this means that it needs neither loading coils, ground-plane, radials nor other auxiliary arrangements.
CXL 2-1/... can, without problems, operate with duplex radios and on the semi-duplex channels, owing to the fact that it is broad-banded. In other words, CXL 2-1/... has a shipshape SWR on the RX-frequencies, which is just as important as it is for the TX-frequencies.
Furthermore, the antenna is a grounded radiator antenna and therefore it shows a DC-short across the coaxial cable.
A conical glassfiber tube completely encloses the carefully designed radiating element to ensure long dependable service in all climates.
Download PDF file for further details and specifications about the CXL 2-1/... VHF antenna.
Please notice, more products are available in the PDF Product Catalogue.CXL 2-1LW/... Universal, Unity-Gain Base Station VHF Antenna (and Marine VHF Antenna), 160 MHz VHF Band
The broad-banded 1/2λ dipole VHF antenna element is sealed in a high-quality conical glassfiber tube with low wind-load, which will ensure undisturbed performance by corrosive environments.
Provided with the sturdy “LW” mast mount - a lightweight, multipurpose, epoxy-coated mounting bracket made of non-corrosive aluminium.
The accompanying U-bolts and fittings are made of stainless steel.
To be mounted on vertical or horizontal mast tubes, 16 to 54 mm in outer diameter. The cable can be led either on the outside or along the inside of the mast tube.
Large bandwidth with respect to both SWR and gain. CXL 2-1LW/… is DC-grounded to substantially reduce noise caused by atmospherical discharges and consequently shows a DC-short across the coaxial cable.
The CXL 2-1LW/… is a vibration-proof, lightweight, slim-line, corrosion-resistant, modern style base station VHF antenna.
Download PDF file for further details and specifications about the CXL 2-1LW/... VHF antenna.
Please notice, more products are available in the PDF Product Catalogue.CXL 2-2C/... Unity Gain, Broad-Banded Base Station VHF Antenna, 160 MHz VHF Band
The antenna covers the complete band: 144-175 MHz.
CXL 2-2C is designed for fixation on supporting tubes with outer diameter between 27 mm and 65 mm. The construction of the mount makes it possible to lead the cable either inside or along the outside of the mast tube.
A glassfiber tube completely encloses the carefully designed radiating element to ensure long dependable service in all climates.
Atmospherical discharges are immediately led to ground as all metal parts are DC-grounded (consequently, the antenna shows a DC-short across the coaxial cable).
This VHF antenna is used where reliability is of utmost importance. A long lifetime has been taken into consideration when designing this antenna – it is sturdy and strong.
Download PDF file for further details and specifications about the CXL 2-2C/... VHF antennas.
Please notice, more products are available in the PDF Product Catalogue.CXL 2-3LW/... Lightweight, 3 dBd Base Station VHF Antenna (and VHF Marine Antenna), 160 MHz VHF Band
Provided with the sturdy “LW” mast mount – a lightweight, multipurpose, epoxy-coated mounting bracket made of non-corrosive aluminium.
The accompanying U-bolts and fittings are made of stainless steel. To be mounted on vertical or horizontal mast tubes, 16 to 54 mm in outer diameter. The cable can be led either on the outside or along the inside of the mast tube.
Large bandwidth with respect to both SWR and gain. The phasing of the radiating elements is adjusted to yield maximum gain in the horizontal plane, with the level of the sidelobes reduced to a minimum.
The carefully designed, broad-banded antenna element is sealed in a high-quality conical glassfiber tube with low wind-load, which will ensure undisturbed performance by corrosive environments.
To substantially reduce noise caused by atmospherical discharges, all metal parts in the antenna are DC-grounded. Consequently, the antenna shows a DC-short across the coaxial cable.
The CXL 2-3LW/… is a vibration-proof, lightweight, slim-line, corrosion resistant, modern style base station VHF antenna.
Download PDF file for further details and specifications about the CXL 2-3LW/... VHF antennas.
Please notice, more products are available in the PDF Product Catalogue.CXL 2-5HD/... Sturdy, 5 dBd Gain, Base Station VHF Antenna, 160 MHz VHF Band
The antenna has a bandwidth of 7 MHz. Please specify centre frequency or duplex TX and RX when ordering.
The VHF antenna is provided with our sturdy type “HD” mast mount, which is a heavy-duty, multipurpose mounting bracket made of non-corrosive aluminium. The accompanying U-bolts and fittings are made of stainless steel. The antenna can be mounted on mast tubes of 58 to 105 mm in outer diameter. Further, the construction of the mount makes it possible to lead the cable either along the inside or on the outside of the mast tube.
In designing this antenna, special emphasis has been laid on obtaining a large bandwidth both in relation to SWR and gain. The phasing of the radiating elements is carefully adjusted to yield maximum gain in the horizontal plane, with the level of the sidelobes reduced to a minimum.
The antenna element is sealed in a high-quality, conical glassfiber tube with low wind-load, which will ensure undisturbed performance in all climates.
To substantially reduce noise caused by atmospherical discharges, all metal parts in the antenna are DC-grounded. Consequently, the antenna shows a DC-short across the coaxial cable.
CXL 2-5HD/… is a vibration-proof, lightweight, slim-line, corrosion-resistant, modern style base station VHF antenna.
No comments:
Post a Comment