VHF Base Station Antenna Procom Product

You can use this product, it's very excellent

CXL 2-1/... Base Station VHF Antenna (and Marine VHF Antenna), 160 MHz VHF Band

This base station VHF antenna is developed for use on board ships as well as on masts and thanks to the 1” revolving nut mounting system it can be mounted in the mast, in the auxilliary mast as well as on the cross-beam. By means of PROCOM’s flange mount it can also be mounted on deck or rooftop.

Bear in mind that the higher the VHF antenna is mounted the better coverage. Avoid mounting the antenna parallel with and in the neighbourhood of other metal parts, such as mast, supporting wires etc. Free mounting and as high as possible is most preferable, otherwise the SWR and the radiation diagram will be influenced.

The VHF antenna is a 1/2λ design and this means that it needs neither loading coils, ground-plane, radials nor other auxiliary arrangements.

CXL 2-1/... can, without problems, operate with duplex radios and on the semi-duplex channels, owing to the fact that it is broad-banded. In other words, CXL 2-1/... has a shipshape SWR on the RX-frequencies, which is just as important as it is for the TX-frequencies.

Furthermore, the antenna is a grounded radiator antenna and therefore it shows a DC-short across the coaxial cable.

A conical glassfiber tube completely encloses the carefully designed radiating element to ensure long dependable service in all climates.

Download PDF file for further details and specifications about the CXL 2-1/... VHF antenna.

Please notice, more products are available in the PDF Product Catalogue.

CXL 2-1LW/... Universal, Unity-Gain Base Station VHF Antenna (and Marine VHF Antenna), 160 MHz VHF Band

This multi-purpose, omnidirectional, 0 dBd, rod-type base station VHF antenna covers the 160 MHz band in two models with 10 MHz overlap and can be used in a wide variety of applications.

The broad-banded 1/2λ dipole VHF antenna element is sealed in a high-quality conical glassfiber tube with low wind-load, which will ensure undisturbed performance by corrosive environments.

Provided with the sturdy “LW” mast mount - a lightweight, multipurpose, epoxy-coated mounting bracket made of non-corrosive aluminium.
The accompanying U-bolts and fittings are made of stainless steel.

To be mounted on vertical or horizontal mast tubes, 16 to 54 mm in outer diameter. The cable can be led either on the outside or along the inside of the mast tube.

Large bandwidth with respect to both SWR and gain. CXL 2-1LW/… is DC-grounded to substantially reduce noise caused by atmospherical discharges and consequently shows a DC-short across the coaxial cable.

The CXL 2-1LW/… is a vibration-proof, lightweight, slim-line, corrosion-resistant, modern style base station VHF antenna.

Download PDF file for further details and specifications about the CXL 2-1LW/... VHF antenna.

Please notice, more products are available in the PDF Product Catalogue.

CXL 2-2C/... Unity Gain, Broad-Banded Base Station VHF Antenna, 160 MHz VHF Band

CXL 2-2C is a 0 dBd gain, omnidirectional base station VHF antenna.
The antenna covers the complete band: 144-175 MHz.

CXL 2-2C is designed for fixation on supporting tubes with outer diameter between 27 mm and 65 mm. The construction of the mount makes it possible to lead the cable either inside or along the outside of the mast tube.

A glassfiber tube completely encloses the carefully designed radiating element to ensure long dependable service in all climates.

Atmospherical discharges are immediately led to ground as all metal parts are DC-grounded (consequently, the antenna shows a DC-short across the coaxial cable).

This VHF antenna is used where reliability is of utmost importance. A long lifetime has been taken into consideration when designing this antenna – it is sturdy and strong.

Download PDF file for further details and specifications about the CXL 2-2C/... VHF antennas.

Please notice, more products are available in the PDF Product Catalogue.

CXL 2-3LW/... Lightweight, 3 dBd Base Station VHF Antenna (and VHF Marine Antenna), 160 MHz VHF Band

CXL 2-3LW/… is a 3 dBd, vertically polarised, omnidirectional base station VHF antenna, which covers the VHF-band in 4 models.

Provided with the sturdy “LW” mast mount – a lightweight, multipurpose, epoxy-coated mounting bracket made of non-corrosive aluminium.
The accompanying U-bolts and fittings are made of stainless steel. To be mounted on vertical or horizontal mast tubes, 16 to 54 mm in outer diameter. The cable can be led either on the outside or along the inside of the mast tube.

Large bandwidth with respect to both SWR and gain. The phasing of the radiating elements is adjusted to yield maximum gain in the horizontal plane, with the level of the sidelobes reduced to a minimum.

The carefully designed, broad-banded antenna element is sealed in a high-quality conical glassfiber tube with low wind-load, which will ensure undisturbed performance by corrosive environments.

To substantially reduce noise caused by atmospherical discharges, all metal parts in the antenna are DC-grounded. Consequently, the antenna shows a DC-short across the coaxial cable.

The CXL 2-3LW/… is a vibration-proof, lightweight, slim-line, corrosion resistant, modern style base station VHF antenna.

Download PDF file for further details and specifications about the CXL 2-3LW/... VHF antennas.

Please notice, more products are available in the PDF Product Catalogue.

CXL 2-5HD/... Sturdy, 5 dBd Gain, Base Station VHF Antenna, 160 MHz VHF Band

CXL 2-5HD/… is a 5 dBd, vertically polarised, omnidirectional base station VHF antenna.
The antenna has a bandwidth of 7 MHz. Please specify centre frequency or duplex TX and RX when ordering.

The VHF antenna is provided with our sturdy type “HD” mast mount, which is a heavy-duty, multipurpose mounting bracket made of non-corrosive aluminium. The accompanying U-bolts and fittings are made of stainless steel. The antenna can be mounted on mast tubes of 58 to 105 mm in outer diameter. Further, the construction of the mount makes it possible to lead the cable either along the inside or on the outside of the mast tube.

In designing this antenna, special emphasis has been laid on obtaining a large bandwidth both in relation to SWR and gain. The phasing of the radiating elements is carefully adjusted to yield maximum gain in the horizontal plane, with the level of the sidelobes reduced to a minimum.

The antenna element is sealed in a high-quality, conical glassfiber tube with low wind-load, which will ensure undisturbed performance in all climates.

To substantially reduce noise caused by atmospherical discharges, all metal parts in the antenna are DC-grounded. Consequently, the antenna shows a DC-short across the coaxial cable.

CXL 2-5HD/… is a vibration-proof, lightweight, slim-line, corrosion-resistant, modern style base station VHF antenna.

VHF (Very High Frequency)

VHF Base and Handled Allowed by UN

Wednesday, July 18th, 2007

Before installation must Prepare

1.Tools

2.S0ft ware
CPS R03.03.00 EN (English version) GP/GM 300 series
CPS R06.01.00 GP/GM 338

3.Cable data
RKN4075A - 2885702802-0602 Special for Handled
AARKN4081B - 7108434X02 - 0512

Motorola GM380 Frequency 136 - 174 MHz
The Advanced Mobile Radio. The Full-Keypad GM380 comes with an expanded feature set, which is essential for growing organizations because of its versatility.

=============================================

Motorola GP380 Handled, Frequency 136 - 174 MHz

The Full-Keypad Versatile Hand Portable Radio.The 255 channel GP380 comes with an expanded feature set, which is essential for growing organizations because of its versatility

=============================================

Rapid Charger and Single Charger

=============================================

Ground Plane Antenna and coaxial cable RG213

VHF REPEATER SYSTEM

=====================================================

This Repeater Used UN and NGO in ACEH when Tsunami's Response

Motorola GR500 Repeater

Product Description Increase the range and capabilities of your mobile and portable radios with the GR500 repeater. It provides the flexibility of frequency bands, power levels, and mounting requirements in a wide variety of applications. VHF, UHF, and Cross-band Capabilities are available in this unit. Optional Controllers can be added for enhanced features such as telephone interconnect, multiple PL/DPL codes and signaling.

Motorola GR500 Features

The GR500 has the following features:

• Modular Design - Allows quick field replacement of disabled components.
• Wall-mount, lockable, heavy duty metal case - Provides ability to remote mount the repeater in an unattended yet secure site.
• Supports VHF/UHF Cross-band Operation - Allows UHF and VHF radios users to communicate with each other.
• Internal Mounting Space for additional components - Allows duplexers, preselectors and battery revert modules to be installed internally.
• UL, CSA Approved

Applications

The GR500 repeater can be used for a variety of applications.

Here are a few examples of some key industries:

• Real Estate Management
• Community & Interconnect Repeaters
• Industrial Complexes
• Transportation Operations
• Rural Police and Fire

Motorola GR500 Repeater Models

All GR500 repeaters include the following:

• Field Programmable
• Support VHF/UHF/Cross-band with multiple frequency operation available
• Internal mounting for Duplexer and Preselctor
• 25W continuous duty
• 40/45 intermittent
• 120/240V, 50/60Hz operation
• UL, CSA, TUV approved
• Integrated battery revert with float maintenance charger
• Compatible with all GR Series controller modules

Accessories

Controllers/Add-On Modules
Controllers are required to automatically re-transmit communications. All of the following controllers provide at least basic repeater capabilities. Additional features are described for each controller.

Basic Interface - Provides repeater functionality, remote knock-down/set-up, in/cross band and uni/bi-directional capabilities.

I20R Onsite Repeater - Provides up to 10 PL/DPL single-code or cross-code combinations for multiple group repeater operations, remote knock-down/set-up, in/cross-band and uni/bi- directional capabilities and CWID (Morse code). The I20R also provides battery power alert tones and Radio Service Software programming.

ZR310 Multiple Tone Community Repeater - Adds up to 50 PL and 20 DPL single-code or cross-code combinations and enhanced community repeater operator capabilities.

I50R Basic Interconnect - Adds basic interconnect and remote knock-down and set-up.

ZR340 Advanced Interconnect - Adds advanced interconnect features such as prestored telephone numbers, access/override access codes, dialing restrictions, call timers, direct-air access and CWID.

ZR320 Selective Calling Interconnect - Provides revertive PL/DPL/Quik-Call group or individual selective calling, CWID and advanced interconnect capabilities.

I750R Selective Calling Interconnect - Provides revertive PL/DPL/Quik Call II/MDC-1200 group or individual selective signalling and advanced interconnect capabilities such as prestored telephone numbers, access/override access codes, dialing restrictions, call timers, direct-air access and CWID.

SmarTrunk II - Requires RadiusPort radios to be equipped with SmarTrunk II Advantage Boards. Provides trunked repeater functionality, group calling, individual selective calling, advanced interconnect calling and airtime accumulation capabilities.

TRA100R Tone Remote Adapter - Provides remote knock-down/set-up and tone remote capabilities for remote access and control of repeaters using the MC series tone-remote desksets.

===============================================================

SOLAR PANEL

If your location haven't Electricity,you can install 4 plate of solar panel and MF (maintenance Free)
Battery for Repeater


BP Solar-BP 380U, 80 Watt 12V Polycrystalline Solar Panel

BP 380S Clear Universal frame with output cables and polarized Multicontact (MC) connectors
BP 380L Unframed laminate version of BP 380S
BP 380U Clear universal frame with standard junction box

The BP 380U solar panel provides superior value and performance for residential, commercial and industrial use, operating DC loads directly or, in an inverter-equipped system, AC loads. Its 36 enhanced-efficiency multicrystalline silicon cells in series charge 12-volt batteries efficiently in virtually any climate. With 80 watts of nominal maximum power, it is well suited to utility grid-supplemental systems and traditional applications of photovoltaics such as telecommunications, remote villages and clinics, water pumping, and land-based aids to navigation. Modules use our Universal frame, the strongest in the industry.

Proven Materials and Construction

BP Solar's quarter-century of field experience shows in every aspect of this module's construction and materials: 36 multicrystalline silicon solar cells in series, efficiency enhanced by improved cell coating; Cells are laminated between sheets of ethylene vinyl acetate (EVA) and high-transmissivity low-iron 3mm tempered glass; Frame strength exceeds requirements of certifying agencies.

BP 380U output is via our Type A junction box. This junction box is rain-tight (IP54 rated) and accepts PG13.5 or 1/2" nominal conduit or cable fittings. Its volume (411cc, 25 cubic inches) and 6-terminal connection block enable series or parallel array connections to be made right in the junction box.

Mechanical Characteristics
High efficiency solar panel using silicon nitride multicrystalline silicon cells.
Clear anodized aluminum alloy type universal frame with standard junction box.
Solar Cells: 36 cells in a 4x9 matrix connected in series.
Junction Box 380U: Type A Standard Junction Box
Diodes: Two 9A, 45V Schottky by-pass diodes included.

Electrical Characteristics
Maximum Power (Pmax): 80 watts
Voltage at Pmax (Vmp): 17.6 volts
Current at Pmax (Imp): 4.55 amps
Warranted minimum Pmax: 76 watts
Short-circuit current (Isc): 4.8 amps
Open-circuit voltage (Voc): 22.1 volts
Temperature coefficient of Isc: (0.065+-0.015)%/C
Temperature coefficient of Voc: -(80+-j10)mV/C
Temperature coefficient of power: -(0.5+-0.05)%/C
NOCT (Air 20C, Sun 0.8 kW/m sq, wind 1 m/s): 47 +-2C
Maximum series fuse rating: 15 amp (20 amp for U version)
Maximum system voltage: 600 volt (US NEC), 1000 volt (TUV Rheinland & IEC 61215

BP 380S and 380U
Dimensions (LWD): 47.6" x 21.1" x 1.97" / 1209 x 537 x 50mm
Weight: 17.0 lbs / 7.7kg

BP 380L
Dimensions (LWD): 47.1" x 20.9" x 0.75" / 1197 x 530 x 19mm
Weight: 13.4 lbs / 6.1kg

==================================================
BATTERY

The Concorde Lifeline is a sealed lead acid battery that uses AGM technology. AGM, or Absorbed Glass Mat, is a fiber mat that is placed between the battery cells that absorbs the electrolyte acid. This creates a durable, sealed, maintenance free and non-spillable battery.

• Copper Alloy Terminals for improved electrical connections.
• Built in lifting handles.
• Reinforced container walls to reduce bulging.
• High Impact Strength Copolymer Polypropylene Case and Cover.
• Completely Sealed Valve Regulated Construction.
• Immobilized Electrolyte Non-Spillable.
• Maintenance Free Design Never Requires Watering.
• Absorbed Glass Mat (AGM) Micro-porous Glass Separators retain electrolyte.
• Flame Arresting Pressure Regulated Safety Valves.
• UL Recognized Systems Component.
• Positive Plates - Proprietary Lead Calcium Alloy - Negatives Plates - Lead Calcium.
• Low Self Discharge Rate Approximately 1% per month at 25 C.
• Operate over a Wide Range of Temperatures from -40 C to +72 C.
• Very long cycle life (Up to 5,000 cycles @ 10% Depth of Discharge).
• Not affected by fast charging.
• Classified as "Non-Spillable Battery" for Transport.

Concorde Lifeline batteries are manufactured by Concorde Battery Corporation to the highest standards in the industry. They are assembled utilising the same methods and procedures as Concorde's world famous aerospace grade batteries. This technology combines basic absorbent glass mat (AGM) principles with other patented procedures and special materials.

The batteries are hand assembled using special interlocking cases which are sealed with epoxy resin. They have superior strength, do not leak while inverted and internally process charging gasses.

==============================================================

Steca PR3030 30A Solar Regulator

Make: Steca
Model: PR3030
Max Charge Current: 30 Amps
System Voltage: 12/24V
Dimensions: 187 x 96 x 44mm


Features

• Atonic Microprocessor controlled charge regulation
• Pulse width modulated charging
• Descriptive graphical display of system status
• Multi-screen fuel gauge and numerical status indication
• Automatic electronic fuse protection
• Internal temperature compensation
• Determination of State of Charge
• Automatically detects 12 or 24 volt system
• Manually controlled load switch
• Low voltage load disconnect
• Optimised float, boost & equalisation charging
• Terminals large enough for 16-25mm2 wire
• Dusk to dawn lighting control feature
• Selectable charging mode for sealed or wet-cell batteries

LCD Screens Display:

• Battery voltage
• Battery state of charge
• Charging current in
• Load current out
• Total charge current in
• Total load current out
• Load switch status

$ 295.00

HF (High Frequency) or Short Wave

HF Mobile, Base and Portable Allowed by UN

Wednesday, July 18th, 2007

This HF Transmitter model allowed from UN for Communication in Emergency Response .
If you want to install the HF Transmitter you must prepare :


1.Tools
Spaniards Set, Ring Set and ring no.24/27 special for adjust antenna
Hand drill (battery)Screw,Insulation tape.

2.Software
NSP .Ver4.11

3.Cable data 08-05123-001 Codan passed1007932

Before Installation you must prepare too Support bracket to put in front your car.(see pictures)

Complete HF “CODAN” Base Station Max Power 125 watt

===========================================

Complete Installed at Vehicle

============================================

Installation system at Vehicle

============================================

HF-90 Manpack

HF-90 Manpack - Olive Drab and UN Blue Versions

The Q-MAC HF-90 Manpack is a portable, instant-deployment HF SSB Radio Communication System, incorporating the Q-MAC HF-90 Transceiver. This package is designed for applications where the operator requires medium to long range communications, whilst on foot. It is ideal where mobility is of paramount importance, given that it is compact, lightweight and comfortable to carry for long periods. It may be used whilst carried on the operators back, or when staked into the ground.

Package Includes

• Q-MAC HF-90 Transceiver c/w Speaker Mic.
• Q-MAC TM-90 Tuner - simple to use Single-Control Tuner, incorporating LED Tuning Indicators c/w Coax/Earth cables.
• Q-MAC Collapsible Whip Antenna - six section Whip Antenna (3m) providing reliable operation from 3.6 to 10 MHz.
• Q-MAC Long Wire Antenna Kit - 7m Wire Antenna c/w Counterpoise, Adaptor and Throw Rope. Allows very efficient operation between 2.5 to 10MHz.
• Q-MAC Rechargeable Battery - sealed lead acid gel, 7Ah, c/w Power Cable and connector for Charging Devices, plus Battery Condition Monitor.
• Q-MAC Canvas Backpack - made from water resistant canvas, c/w fully padded/reinforced compartments to house HF-90/TM-90 and Accessories.
• Military-Grade Backpack on Frame also available (optional).
• Total weight of package is approximately 7kg.

End Users

The Q-MAC HF-90 Manpack is being used worldwide in a variety of applications including; international aid projects, military/paramilitary applications, search and rescue, mineral exploration, forestry management, conservation and wildlife projects.

Technorati Profile